Scania AXI fault codes
All 59 Scania AXI diagnostic trouble codes, with meaning, causes and how to fix them.
Control units:
AXI1AXI1 (AXIA)
Showing 1–59 of 59 codes
- 192767hex 02F0FF The fault code memory is full
- 194815hex 02F8FF Internal fault in control unit
- 259327hex 03F4FF Current from AXI too high
- 261375hex 03FCFF Wrong software installed
- 324863hex 04F4FF Internal current sensor calibration failed
- 390399hex 05F4FF The inverter's internal temperature sensor is defective
- 454911hex 06F0FF The inverter temperature is too high
- 457983hex 06FCFF The inverter has been reset
- 521471hex 07F4FF The inverter temperature is very high
- 522495hex 07F8FF The supply voltage has been too high
- 587007hex 08F4FF Inverter overloaded
- 588031hex 08F8FF Low supply voltage
- 652543hex 09F4FF Inverter current limit exceeded
- 653567hex 09F8FF Inverter ID pin, faulty
- 717055hex 0AF0FF Internal software fault in the inverter
- 783615hex 0BF4FF Overvoltage at the inverter input
- 849151hex 0CF4FF Overvoltage at the inverter input
- 914687hex 0DF4FF Voltage too low at the inverter input
- 980223hex 0EF4FF Fault in the vehicle's second inverter
- 1045759hex 0FF4FF Engine temperature sensor faulty
- 1110271hex 10F0FF The engine temperature sensor reaches warning level
- 1176831hex 11F4FF The engine temperature sensor has reached fault level
- 1242367hex 12F4FF Rotational speed outside the compressor engine's speed range requested
- 1307903hex 13F4FF Unstable battery voltage
- 1309951hex 13FCFF High battery voltage
- 1373439hex 14F4FF Fault in the inverter's internal CAN communication
- 1375487hex 14FCFF Software fault
- 1438975hex 15F4FF Internal fault
- 1441023hex 15FCFF Application check failure
- 1504511hex 16F4FF Software check could not be carried out
- 1506559hex 16FCFF Engine control unit software update failed
- 1570047hex 17F4FF Synchronisation fault
- 1572095hex 17FCFF Engine control unit, software not activated
- 1635583hex 18F4FF Invalid fault code
- 1637631hex 18FCFF Problem with parameters
- 1701119hex 19F4FF The engine position signal is too high
- 1702143hex 19F8FF Set time limit for CAN message reached
- 1766655hex 1AF4FF Rotor position sensor calibration
- 1767679hex 1AF8FF The inverter lacks communication within the set time limit
- 1832191hex 1BF4FF Internal hardware fault in the inverter
- 1833215hex 1BF8FF Incorrect message received
- 1896703hex 1CF0FF Invalid fault code
- 1898751hex 1CF8FF Internal fault
- 1963263hex 1DF4FF Internal fault
- 1965311hex 1DFCFF Internal fault
- 2028799hex 1EF4FF The engine has stopped
- 2030847hex 1EFCFF Internal fault
- 2093311hex 1FF0FF Warning for high temperature in the inverter
- 2095359hex 1FF8FF CAN bus short-circuited
- 2159871hex 20F4FF The temperature of the inverter is too high
- 2225407hex 21F4FF Internal fault in the inverter
- 2290943hex 22F4FF Current too high at inverter output
- 2355455hex 23F0FF Very high ripple level at inverter input
- 2420991hex 24F0FF Compressor engine load, warning
- 2487551hex 25F4FF Compressor engine load, fault
- 2553087hex 26F4FF The engine is switched off during speed control
- 2618623hex 27F4FF Incorrect parameter combination selected
- 2683135hex 28F0FF Plug lock sensor signal low
- 2749695hex 29F4FF Short circuit at inverter output