Scania BDS DTC 16744715 Communication with the DCS control unit

BDS BDS control unit · Scania · 2 variants

Code 16744715 (decimal). Some diagnostic tools show it in hexadecimal as FF810B.

In short

A CAN message expected on the sub data bus from the DCS control unit has failed to arrive.

Variant 1

Applies to: BDS1 (DCSXB)

What does Scania BDS fault code 16744715 mean?

A CAN message expected on the sub data bus from the DCS control unit has failed to arrive.

What causes Scania DTC 16744715?

- Fault in the CAN network. - Fault in the DCS control unit E106.

What are the symptoms?

Functions controlled by the door control system may be degraded or stop working.

How to fix Scania BDS fault code 16744715?

  1. Check CAN communication on the sub data bus with the DCS control unit E106.
  2. Check the DCS control unit E106.

Variant 2

Applies to: BDS1 (DCSXB)

Detection

A CAN message expected on the sub data bus from the DCS control unit has failed to arrive.

Possible cause

- Fault in the CAN network. - Fault in the DCS control unit E106.

System reaction

Functions controlled by the door control system may be degraded or stop working.

How to fix

  1. Check CAN communication on the sub data bus with the DCS control unit E106.
  2. Check the DCS control unit E106.

This information is for guidance only. Always follow the manufacturer workshop manual and safety procedures; if in doubt, contact an authorised workshop.

Code 16744715 in other Scania systems

Compare code 16744715 in every system →