Scania fault code 1042

EBS Electronic Braking System Control unit Incorrect or unreliable data. Read explanation → BMU Battery Management Unit Temperature sensor T210, open circuit in circuit or shorted to 24 V Open circuit or short circuit to voltage supply. Read explanation → VDT Internal fault Invalid configuration. Read explanation → COO Coordinator EAS control unit, invalid values The EAS control unit communicates that it has been in a start-up mode for more than 5 minutes even though vehicle speed is over 7 km/h. Read explanation → MBS Expansion unit L, electric power supply fault The MBS control unit has detected that the supply voltage to expansion unit L has had an anomalous value. The supply voltage to the expansion unit has been below 16 V. Read explanation → DAS Short-range radar, left-hand side The short-range radar system reports limited functionality or that a significant signal is sent with unsatisfactory status when the vehicle is in motion. Read explanation → TCC TCC control unit, level sensor in the water tank for hand washing, resistance too high The control unit calculates the level in the hand wash water tank via a resistance reading from the level sensor. The resistance is too high. Read explanation →