Scania fault code 1283

EMS Engine Management System Cylinder 3, severe misfiring Cylinder 3 misfires so much that there is a risk of damage to the catalytic converter. Read explanation → TMS Transmission Management System Solenoid valve for high splitter gear, open circuit Open circuit in the solenoid valve cable harness for voltage supply or earthing. If the open circuit applies to earth, the same fault code will also be set for other solenoid valve… Read explanation → BMU Battery Management Unit Unknown fault VCCU Read explanation → VDT Internal fault Internal memory fault in control unit E754. Read explanation → COO Coordinator Electrically assisted steering (EAS) system The EAS control unit does not receive messages from external control units. Read explanation → MBS Expansion unit C, internal fault The MBS control unit has detected faults in the voltage regulators or communication buses in Expansion unit C. Read explanation → ALM Control unit, internal fault Response time from the ALM control unit is longer than expected. Read explanation → COMMUNICATOR Communicator (C200 / C300 / C400) Digital output 2 is short-circuited to ground The fault code is activated if digital output 2 is short-circuited to ground. A check is carried out each time the system is started. Read explanation →