Scania fault code 1285
Code 1285 is used by 7 different Scania systems. Choose the control unit shown in your diagnostic tool:
EMS Engine Management System
Cylinder 5, severe misfiring
Cylinder 5 is misfiring so much that there is a risk of damage to the catalytic converter.
Read explanation →
TMS Transmission Management System
Solenoid valve for high splitter gear, short circuit
Short circuit to 30 voltage in the cable harness for the solenoid valve voltage supply.
Read explanation →
BMU Battery Management Unit
CMP fault
BMU has received a fault message from CMP.
Read explanation →
VDT
Internal fault
Internal memory fault in control unit E754.
Read explanation →
COO Coordinator
Lane keep assist (LKA) toggle switch
Problems activating or deactivating lane keep assist.
Read explanation →
MBS
Expansion unit J, internal fault
The MBS control unit has detected faults in the voltage regulators or communication buses in Expansion unit J.
Read explanation →
COMMUNICATOR Communicator (C200 / C300 / C400)
Secondary wake-up signal
Short circuit to ground for the secondary wake-up signal.
Read explanation →