Scania fault code 1301

EMS Engine Management System Cylinder 5, misfire Cylinder 5 is misfiring so much that the emission limit is exceeded. Read explanation → TMS Transmission Management System Solenoid valve for high range gear, open circuit Open circuit in the solenoid valve cable harness for voltage supply or earthing. If the open circuit applies to earth, the same fault code will also be set for the range reverse ge… Read explanation → BMU Battery Management Unit External electric vehicle charging station does not stop charging After charging is interrupted, the charge current will not drop below 0.9 A within 10 seconds. Read explanation → VDT Internal fault Internal fault in control unit E754. Read explanation → COO Coordinator Short-range radar, left-hand side No CAN communication on the CAN bus for the short-range radar on the left-hand side. Read explanation → MBS E6047, MBS Expansion unit J, internal fault The MBS control unit has detected faults in the communication buses. Read explanation → DAS Hazard warning LED lamp control system Open circuit in the CAN communication. Read explanation →