Scania fault code 1313

EMS Engine Management System Oil pressure sensor T5 One or more faults in the oil pressure sensor. Read explanation → TMS Transmission Management System Solenoid valve for layshaft brake, open circuit Open circuit in the solenoid valve cable harness for voltage supply or earthing. If the open circuit applies to earth, the same fault code will also be set for other solenoid valve… Read explanation → BMU Battery Management Unit Faulty contact rail voltage The contact rail voltage is not reaching the correct level within seven seconds of the electric vehicle charging station being activated. Read explanation → EMD Oil pressure sensor T5 One or more faults in the oil pressure sensor. Read explanation → EME Oil pressure sensor T5/T4001 One or more faults in the oil pressure sensor. Read explanation → EMO Oil pressure sensor T5 One or more faults in the oil pressure sensor. Read explanation → VDT Internal fault Internal fault in control unit E754. Read explanation → COO Coordinator Short-range radar, right-hand side It has taken too long to launch short-range radar on the right-hand side. Read explanation → PCS L2 engage solenoid valve - Open load Detected by HW. Read explanation →