Scania fault code 1316

EMS Engine Management System Oil pressure sensor T5, low oil pressure The oil pressure was too low when the engine was running. Read explanation → TMS Transmission Management System Solenoid valve for planetary gear brake, open circuit Open circuit in the solenoid valve cable harness for voltage supply or earthing. If the open circuit applies to earth, the same fault code will also be set for the planetary gear c… Read explanation → BMU Battery Management Unit BMU does not allow charging Charging will not start because BMU has detected a fault affecting the charging. Read explanation → EMD Oil pressure sensor The signal from the oil pressure sensor is lower than normal. This means that the oil pressure measured at a certain speed is lower than it should be. Read explanation → EME Oil pressure sensor T5/T4001 The signal from the oil pressure sensor is lower than normal. This means that the oil pressure measured at a certain speed is lower than it should be. Read explanation → EMO Oil pressure sensor The signal from the oil pressure sensor is lower than normal. This means that the oil pressure measured at a certain speed is lower than it should be. Read explanation → VDT Internal fault Internal fault in control unit E754. Read explanation →