Scania fault code 1319
Code 1319 is used by 3 different Scania systems. Choose the control unit shown in your diagnostic tool:
TMS Transmission Management System
Solenoid valve for planetary gear clutch, open circuit
Open circuit in the solenoid valve cable harness for voltage supply or earthing. If the open circuit applies to earth, the same fault code will also be set for the planetary gear b…
Read explanation →
BMU Battery Management Unit
Live contact rails
The voltage sensor in contactor unit E530 is connected via CAN and indicates that the voltage is >40 V at the contact rails when they should not be live.
Read explanation →
VDT
CAN messages
Fault in signal indicating minutes in the CAN message.
Read explanation →