Scania fault code 1329
Code 1329 is used by 5 different Scania systems. Choose the control unit shown in your diagnostic tool:
TMS Transmission Management System
Solenoid valve for the retarder's proportional valve, short-circuited supply voltage
The solenoid valve supply voltage is connected directly to the 30 voltage.
Read explanation →
BMU Battery Management Unit
The electric vehicle charging station is supplying low current
The electric vehicle charging station has delivered 20 per cent lower current than requested.
Read explanation →
VDT
CAN messages
Fault in signal indicating year in the CAN message.
Read explanation →
COO Coordinator
Button malfunction in the CAN network for power take-off EK
The button has been pressed in for 120 seconds or has an error message from the pushbutton module.
Read explanation →
PCS
Pressure accumulator, solenoid valve shorted to the voltage supply
The solenoid valve does not change position.
Read explanation →