Scania fault code 1350
Code 1350 is used by 5 different Scania systems. Choose the control unit shown in your diagnostic tool:
TMS Transmission Management System
Solenoid valve for oil distribution, short circuit
Short circuit to earth in the solenoid valve cable harness. The fault code is only set when the solenoid valve is activated.
Read explanation →
BMU Battery Management Unit
Heater H41 for heating the cab is not activated
The heater temperature does not increase as expected.
Read explanation →
VDT
System for early warning
The retarder control pressure has reached an early warning level.
Read explanation →
COO Coordinator
BCI-CAN bus, electrical fault
No data is transmitted on the BCI-CAN bus.
Read explanation →
EEC Exhaust Emission Control
Exhaust gas temperature sensor upstream of oxidation catalytic converter
The exhaust gas temperature sensor upstream of the oxidation catalytic converter indicates incorrect values.
Read explanation →