Scania fault code 1845

MBS MBS expansion unit J, power supply pin group V3, current above limit value MBS expansion unit J, current to the pin for power supply pin group V3 has exceeded the limit value of 20 A for more than 5 seconds. Read explanation → ALLISON Allison automatic gearbox Incorrect gear ratio on 5th gear Actual 5th gear ratio does not agree with the calculated 5th gear ratio. Gear ratio is determined on the basis of turbine speed and output shaft speed. This measured gear ratio is… Read explanation → CID FMS CAN bus, short circuit in cable harness CAN messages are missing from CAN bus L and CAN bus H. Read explanation → DD FMS CAN bus, short circuit in cable harness CAN messages are missing from CAN bus L and CAN bus H. Read explanation →