Scania fault code 261

EBS Electronic Braking System Control unit Incorrect or unreliable data. Read explanation → EMS Engine Management System Charge air pressure sensor T122 The charge air pressure sensor T122 produces a value that is outside the permitted range. Read explanation → VDT Solenoid valve Short circuit to battery for the solenoid valve coil. Read explanation → ELC Electronically controlled air suspension Sensor signal from front axle level sensor. The voltage on the input from the level sensor is between 5.86 V and 9.71 V. Read explanation → ABS Anti-lock Braking System Brake pressure limitation The voltage from the EBL brake pressure sensor has been below the permitted level. Read explanation → ALM Wake-up signal for Scania Communicator, short circuit Wake-up signal for Scania Communicator is short-circuited to ground. Read explanation → WTA Water temperature sensor Impermissible voltage level in the water temperature sensor circuit. Read explanation → EACS Air compressor The air compressor has stopped several times due to a weak electric motor or an excessive load. Read explanation → EQU 12 V supply voltage is too high The supply voltage for 12 V is too high. Read explanation →