Scania fault code 27

COO Coordinator Signals from the starter lock The start signal (50) from the starter lock to the coordinator has been active for too long. The fault code is generated if the start signal is active for more than five minutes. Read explanation → ABS Anti-lock Braking System Wheel speed Interference in speed signal from wheel on left-hand side of front axle. Read explanation → CUV Visibility system Control unit Internal fault. Read explanation → APS Air Processing System Control unit The control unit does not conform to production standards. Read explanation → DIS Time and date information Time or date in CAN-message TD is incorrect. Read explanation → ACS Articulation Control System Control units, ACS The ACS control units have different parameter settings or there is a defective cable harness. Read explanation → AUS Audio System Sound output, short circuit Sound output to subwoofer, short circuit to ground. Read explanation → BCS Control unit The control unit has not been programmed correctly. Read explanation →