Scania fault code 33

EMS Engine Management System Fuel inlet metering valve 2, high pressure pump, short circuit The control unit has detected an abnormal voltage on the pins connected to fuel inlet metering valve 2 on the high pressure pump, indicating a short circuit. Read explanation → VDT Rotational speed sensor Short circuit to ground. Read explanation → COO Coordinator Manual activation of retarder The voltage in the retarder lever circuit or retarder Opticruise lever circuit has been either above or below the permitted level. Read explanation → ABS Anti-lock Braking System Wheel speed Low signal strength from the wheel on the right-hand side of the front axle. Read explanation → CUV Visibility system Control unit Internal fault in the control unit. Read explanation → LAS Locking and Alarm System Motion sensor in the cab The voltage on the alarm control unit input is incorrect. Read explanation → DIS Incorrect DLC in CAN message VDC2 The DLC sum in the CAN message TD is too small. Read explanation → ACS Articulation Control System Left proportional valve, ACS, open circuit Open circuit in the left proportional valve circuit. Read explanation →