Scania fault code 35

VDT Rotational speed sensor Short circuit to ground. Read explanation → COO Coordinator High range The high range solenoid valve has had an electric power consumption that is either above or below the permitted level. Read explanation → ELC Electronically controlled air suspension Solenoid valve for front axle, left-hand side The voltage on the output to the solenoid valve has been too high. Read explanation → ABS Anti-lock Braking System Wheel speed The control unit has detected DC voltage in the signal from the wheel on the right-hand side of the front axle. Read explanation → CUV Visibility system Current consumption too high. The control unit has detected that total current consumption is too high (over 80A). Read explanation → LAS Locking and Alarm System Motion sensor in bodywork The voltage on the alarm control unit input is incorrect. Read explanation → DIS Limited search field The radar cannot search across its normal field of 5.5°. Read explanation → ACS Articulation Control System Control unit 2, ACS Control unit 2 has not been programmed correctly. Read explanation → AUS Audio System 12 V output 1, short circuit 12 V output 1 from the electronic control unit to the camera or other ancillary equipment, short circuit to supply voltage. Read explanation →