Scania fault code 4208

EMS Engine Management System Outdoor temperature sensor T27 Fault in the outdoor temperature sensor. Read explanation → EMU Heater H40, invalid signal or internal fault The control unit is reporting an internal fault Read explanation → BMU Battery Management Unit Discharge current limit exceeded The propulsion battery's charging current was higher than the fixed limit sent. Read explanation → EMD Main mirror and wide-angle mirror heater element on the driver's side One or more faults detected in the main mirror and wide-angle mirror heater element on the driver's side H2. Read explanation → EME Combined sensor One or more faults detected in the combined sensor. Read explanation → EMO Main mirror and wide-angle mirror heater element on the driver's side One or more faults detected in the main mirror and wide-angle mirror heater element on the driver's side H2. Read explanation → DDU External amplifier, channel 3, short circuit to earth The DDU control unit has measured a voltage that indicates a short circuit to earth. Read explanation → ICL Instrument Cluster Loudspeakers Internal fault. The speaker does not function. Read explanation → GSC High pressure solenoid valve Incorrect level on current signal through the solenoid valve coil. Read explanation →