Scania fault code 558
Code 558 is used by 3 different Scania systems. Choose the control unit shown in your diagnostic tool:
COO Coordinator
Vehicle speed signal
The vehicle speed signal from the vehicle speed sensor or the tachograph has been outside the permitted range. On vehicles without a tachograph, the coordinator receives the vehicl…
Read explanation →
CUV Visibility system
Dipped beam RH
Current consumption on the control unit output has exceeded 8.5 A for one second.
Read explanation →
BCI
Overload, ExpBuss-B16
Overload at output. Current drawn at output exceeds 0.5 A.
Read explanation →