Scania fault code 614

EMS Engine Management System Cylinder balancing (min or max), cylinder 2 The cylinder balancing values have reached their maximum or minimum permissible limit. Read explanation → EMD Cylinder balancing (min or max), cylinder 2 The cylinder balancing values have reached their maximum or minimum permissible limit. Read explanation → EME Cylinder balancing (min or max), cylinder 2 The cylinder balancing values have reached their maximum or minimum permissible limit. Read explanation → EMO Cylinder 2 balancing min or max The cylinder balancing compensation value has reached the minimum or maximum value for the cylinder. It is not possible to adjust the balancing value any further. The test is only… Read explanation → VDT Internal fault Implausible message via CAN. Read explanation → MBS #Not implemented. CAN timeout of BCI Communication with the BCI has timed out (communication interrupted). Read explanation → CUV Visibility system Main beam, left-hand side Fault in the main beam LED module in the left-hand headlamp. Read explanation → EST Service mode The tag axle steering system has been put into service mode. In order to perform maintenance on the vehicle in a safe manner, the system must be deactivated. Read explanation → ESTA Service mode The tag axle steering system has been put into service mode. In order to perform maintenance on the vehicle in a safe manner, the system must be deactivated. Read explanation →