Scania fault code 615

EMS Engine Management System Injector, cylinder 3 Short-circuited to ground. Read explanation → VDT Internal fault Implausible message via CAN. Read explanation → COO Coordinator ED2 power take-off The voltage in the solenoid valve circuit for the ED2 gearbox-driven power take-off is low even though the output is activated. Read explanation → MBS Infotainment system (BIS), fault in CAN communication CAN communication with the bus infotainment system (BIS) is missing or has been disconnected. Read explanation → CUV Visibility system Daytime running light/position lamp, left Fault in the daytime running light/position lamp LED module in the left-hand headlamp. Read explanation → EST Straight-ahead position is not calibrated The serial number of the piston position sensor does not correspond to the serial number registered in the tag axle steering system. Read explanation → ESTA Straight-ahead position is not calibrated The serial number of the piston position sensor does not correspond to the serial number registered in the tag axle steering system. Read explanation →