Scania fault code 68

EMS Engine Management System Exhaust pipe, temperature too high The engine control unit has detected that the temperature in the exhaust gas aftertreatment management system is too high. Read explanation → VDT Temperature and oil level sensor Open circuit. Read explanation → COO Coordinator Acknowledgement that neutral gear is engaged The signal from the acknowledgement switch that acknowledges engaged neutral gear has been implausible in relation to the engine speed, the output shaft speed and the clutch pedal… Read explanation → ABS Anti-lock Braking System Wheel speed The current in the wheel circuit on the right-hand side of the driving rear axle has been above the permitted level. Read explanation → CUV Visibility system Reversing light relay Open circuit, current consumption too low, or short circuit to voltage supply. Read explanation →