Scania fault code 691

TMS Transmission Management System No CAN message from the EEC control unit The control unit generates an interrupt message, it is not receiving engine information. Read explanation → COO Coordinator Communication with the ACS control unit The communication between the coordinator and the ACS control unit has been interrupted. Read explanation → ELC Electronically controlled air suspension Control valve for tag axle or rearmost rear axle. The voltage on the output to the solenoid valve has been too high. Read explanation → CUV Visibility system Vehicle turn alarm right front, high electric power consumption on pin Electric power consumption is too high in vehicle turn alarm, right front. Read explanation → BCI Break switch, sliding fifth wheel Short circuit to ground in break switch 1. Read explanation → CMS Information fault, load status Incorrect information relating to load status. Read explanation → LDW Lane Departure Warning Yellow light-emitting diode Voltage too high on output to the yellow light emitting diode. Read explanation →