Scania fault code 789

BMU Battery Management Unit Solenoid valve for the propulsion battery cooling system Open circuit in the solenoid valve circuit. Read explanation → COO Coordinator Switch, vehicle level adjustment All communication on the CAN bus for short-range radar on the right side has been interrupted. Read explanation → MBS #Not implemented. AmbientAirTemperature error Cooling with ac not functioning when should or running in cold ambient temp. Read explanation → DDU BWE control unit, no CAN communication The DDU control unit is not receiving CAN messages from the BWE control unit. Read explanation → ICL Instrument Cluster Communication with the BCS control unit No CAN message from the bodywork electrical system. Read explanation → CMS Battery master switch No or implausible signal from the battery master switch. The battery master switch does not disconnect from the batteries. Read explanation → DCU Emergency opening system reset valve A, output, open circuit The door control unit has detected a current that is too low in reset valve B for the emergency opening system (CN6-11). Read explanation →