Scania fault code 795
Code 795 is used by 4 different Scania systems. Choose the control unit shown in your diagnostic tool:
COO Coordinator
Communication on the LIN bus
The LIN bus is overloaded.
Read explanation →
MBS
No CAN message from the tachograph on external CAN bus
No CAN message from the tachograph on external CAN bus.
Read explanation →
DDU
TPM control unit, no CAN communication
The DDU control unit is not receiving CAN messages from the TPM control unit.
Read explanation →
ICL Instrument Cluster
Communication with tyre pressure monitor (TPM)
No CAN messages from the tyre pressure monitor.
Read explanation →