Scania fault code 802

BMU Battery Management Unit The voltage in the propulsion battery is outside the permitted range One of the following faults has occurred: - The voltage class B for the propulsion battery is above the permissible limit, i.e. > 792 V. - The voltage class B for the propulsion ba… Read explanation → COO Coordinator Power steering circuit 1 The flow in power steering circuit 1 has been implausible in relation to the engine speed. Read explanation → MBS Electric compressor, rotational speed The HPAC control unit indicates a fault in the electric compressor. Read explanation → DDU Missing CAN-messages from DD No CAN message recieved from Driver Display (DD1) Only stored when ignition is ON. Read explanation → PCS CAN message missing Messages have not been received within 5 nominal transfer rate periods. Read explanation → CMS Longitudinal differential lock solenoid valve, double-drive bogie Circuit for the solenoid valve is broken. Read explanation → DCU Door control unit, potentiometer front door leaves, voltage outside valid range The door control unit has detected that the voltage at the input (CN3-6) is outside the valid voltage range 0.8-10.6 V. Read explanation →