Scania fault code 804

BMU Battery Management Unit Propulsion battery level monitor T181 is defective The level monitor for the propulsion battery cooling system is defective. Discovered through the response from the level monitor. Read explanation → COO Coordinator Voltage supply, short circuit to earth Short circuit in voltage supply travelling via relay 19. Read explanation → MBS Refrigerant system passenger area, pressure too high The high pressure sensor for the climate system reports too high a pressure. Read explanation → DDU Missing CAN-messages from AMP No CAN message recieved from the external amplifier (AMP1) . Only stored when ignition is ON. Read explanation → CMS Solenoid valve for differential lock, 2nd rear axle The solenoid valve (V1005) controlling the differential lock for the second rear axle, connected on PWM output 4 (Pin: signal A16, earth A18) is either not connected or is short-ci… Read explanation → ALM Interrupted electric power supply Unexpected interruption in the electric power supply while the alarm system was activated. Read explanation → DCU Micro switch front door leaf, door lock, open circuit The measured voltage on the input pin, 3-phase input, to the door control unit indicates an open circuit. This occurs when the measured voltage is approx. 8 – 16 V and the supply v… Read explanation →