Scania fault code 864
Code 864 is used by 5 different Scania systems. Choose the control unit shown in your diagnostic tool:
BMU Battery Management Unit
Battery module 11 in propulsion battery, CAN communication interrupted
Communication with battery module 11 in the propulsion battery was interrupted.
Read explanation →
VDT
CAN bus
Invalid configuration.
Read explanation →
COO Coordinator
Harness-to-harness connector, wake-up signal sub data bus
The control unit wake-up signal for the sub data bus is shorted to ground.
Read explanation →
PCS
CAN timeout on message HSC1 from COO
Message not received within 5 nominal transmission rate periods.
Read explanation →
DAS
Wake-up signal sub data bus
The control unit wake-up signal for the sub data bus is shorted to ground.
Read explanation →