Variant 1
Applies to: EMS S7EMS S8
What does Scania EMS fault code 11182 mean?
This fault code is generated when there are one or more faults in the NOx control. The fault code is used by the authorities to see if the NOx control has been activated and is not used when repairing the vehicle.
What causes Scania DTC 11182?
There is a fault in a component used to measure the vehicle's NOx emissions.
How does the system react?
Warning indication is displayed for NOx monitoring. The engine torque is reduced by 40% once the fault code has been active for 36 h. The fault code cannot be cleared. It disappears if it has been inactive for 400 days or for 9,600 operating hours.
How to fix Scania EMS fault code 11182?
- If the fault code is active: Rectify other active fault codes.
- If the fault code is inactive: No action is required.
Variant 2
Applies to: EMS S6
Detection
This fault code does not indicate any fault. It is only intended to inform the authorities and should not be used for troubleshooting.
Possible cause
The fault code indicates that there have been fault codes in the vehicle that affect the emissions of nitrogen oxides (NOx). The information is required to comply with the NOx control legislation. This fault code indicates that the control unit has generated fault codes for problems with monitoring the NOx level.
System reaction
The fault code cannot be deleted. The fault code will be automatically deleted when it has been inactive for 400 days.
How to fix
No action.
This information is for guidance only. Always follow the manufacturer workshop manual and safety procedures; if in doubt, contact an authorised workshop.