Scania EPB DTC 15735852 CAN communication with the gearbox management system (GMS)

Q: What does Scania EPB fault code 15735852 mean?

CAN communication with the gearbox management system (GMS). There is no CAN message from the GMS control unit. Code 15735852 (decimal). Some diagnostic tools show it in hexadecimal as F01C2C.

Q: How to fix Scania EPB fault code 15735852?

- Check for short and open circuits in the CAN network connected to the GMS control unit. - Check fault codes from the GMS control unit.

EPB Electric Parking Brake · Scania

Code 15735852 (decimal). Some diagnostic tools show it in hexadecimal as F01C2C.

In short

There is no CAN message from the GMS control unit.

Applies to: EPB1

What does Scania EPB fault code 15735852 mean?

There is no CAN message from the GMS control unit.

What causes Scania DTC 15735852?

- Electromagnetic radiation. - The GMS control unit is disconnected from the CAN network. - The GMS control unit has an internal fault.

How does the system react?

Signals from Gearbox controller ECU (with source address 0x03) are not available or erroneous, therefore not used. This can cause various effects. Yellow warning lamp.

What are the symptoms?

Some of the parking brake user functions are limited.

How to fix Scania EPB fault code 15735852?

Check for short and open circuits in the CAN network connected to the GMS control unit.
Check fault codes from the GMS control unit.

This information is for guidance only. Always follow the manufacturer workshop manual and safety procedures; if in doubt, contact an authorised workshop.