Scania FLC DTC 14681863 Time

FLC Forward Looking Camera · Scania

Code 14681863 (decimal). Some diagnostic tools show it in hexadecimal as E00707.

In short

The camera's internal clock does not match the vehicle time on CAN.

Applies to: FLC3 (FLC)

What does Scania FLC fault code 14681863 mean?

The camera's internal clock does not match the vehicle time on CAN.

What causes Scania DTC 14681863?

- Unable to perform automatic time synchronisation. - Vehicle time is missing in CAN. - The fault code was set at start-up, before automatic synchronisation could take place.

How does the system react?

The camera will use its internal clock until automatic synchronization can be performed.

How to fix Scania FLC fault code 14681863?

  1. Check that the ICL control unit is sending the correct vehicle time.
  2. Check whether any other control units do not have the correct vehicle time.
  3. Check the CAN network.
  4. Check the cable harness and harness-to-component connector.
  5. Check for any available software updates.
  6. If the fault persists, renew the camera.

This information is for guidance only. Always follow the manufacturer workshop manual and safety procedures; if in doubt, contact an authorised workshop.