Scania MBS DTC 519 Not in use

MBS Sterownik MBS · Scania

Kod 519 (dziesiętnie). Niektóre testery diagnostyczne pokazują go szesnastkowo jako 0207.

W skrócie

Communication error. The CAN-controller of the Blue CAN-bus has entered state bus-off. There might be a short circuit on the Blue CAN-bus

Dotyczy: MBS3 (MBS)

Co oznacza kod błędu Scania MBS 519?

Communication error. The CAN-controller of the Blue CAN-bus has entered state bus-off. There might be a short circuit on the Blue CAN-bus

Co powoduje kod DTC 519 marki Scania?

• Defect wiring of Blue CAN-bus: - short circuit between CAN-high and CAN low. - short circuit between CAN-high and supply voltage. - short circuit between CAN-high and ground. - short circuit between CAN-low and supply voltage. - short circuit between CAN-low and ground. • Defect ECU unit(s) on the blue CAN-bus.

Jak reaguje system?

Functions dependent on information on the Blue CAN-bus to and from BCI might be degraded. E.g. - Many chassis related functions might be degraded. - BCI and/or MBS commiunication/ functionality degraded.

Jak naprawić kod błędu Scania MBS 519?

  1. Check connector for Blue CAN-bus on MBS (pin CN-7 and 8).
  2. Measure the resistance (with the battery disconnected) between CAN-high (pin CN3- 7) and CAN-low (pin CN3-7).
  3. It should be close to 60 ohm (one 120 ohm termination resistor in each end of the CAN-bus).
  4. Measure the resistance (with the battery disconnected) between CAN-high on MBS (pin CN3-7) and CAN-high on any other unit on the expansion CAN-bus.
  5. It should be close to zero ohm.
  6. Measure the resistance (with the battery disconnected) between CAN-low on MBS (pin CN3-8) and CAN-low on any other unit on the expansion CAN-bus.
  7. It should be close to zero ohm.
  8. Trouble shoot CAN bus cable harness and connectors

Te informacje mają charakter wyłącznie poglądowy. Zawsze postępuj zgodnie z instrukcją warsztatową producenta oraz procedurami bezpieczeństwa; w razie wątpliwości skontaktuj się z autoryzowanym warsztatem.

Kod 519 w innych systemach Scania

Porównaj kod 519 we wszystkich systemach →