Scania BPS DTC 1048607 BPS control unit, incorrect programming

BPS BPS control unit · Scania · 2 variants

Code 1048607 (decimal). Some diagnostic tools show it in hexadecimal as 10001F.

In short

The BPS control unit has: - incorrect or invalid software. or - incorrect or invalid spare part programming.

Variant 1

Applies to: BPS1 (DCSXC)

What does Scania BPS fault code 1048607 mean?

The BPS control unit has: - incorrect or invalid software. or - incorrect or invalid spare part programming.

What causes Scania DTC 1048607?

- The BPS control unit (E109) has incorrect software. - Spare part programming has not been completed correctly or performed at all.

How does the system react?

The control unit has reduced functionality.

How to fix Scania BPS fault code 1048607?

  1. Check that the BPS control unit has been updated with the latest software.
  2. Spare parts program the BPS control unit.
  3. Renew the control unit.

Variant 2: BPS control unit, incorrect spare part programming

Applies to: BPS1 (DCSXC)

Detection

The BPS control unit has a software error.

Possible cause

- The BPS control unit (E109) has incorrect software. - Spare part programming has not been completed correctly or performed at all.

System reaction

The control unit has reduced functionality.

How to fix

  1. Check that the BPS control unit has been updated with the latest software.
  2. Spare parts program the BPS control unit.
  3. Try to reset the window's position.
  4. Run Calibration of window position, door behind front passenger area.
  5. Renew the BPS control unit.

This information is for guidance only. Always follow the manufacturer workshop manual and safety procedures; if in doubt, contact an authorised workshop.

Code 1048607 in other Scania systems

Compare code 1048607 in every system →