Scania DCS DTC 1048607 DCS control unit, incorrect programming

DCS DCS control unit · Scania · 2 variants

Code 1048607 (decimal). Some diagnostic tools show it in hexadecimal as 10001F.

In short

The DCS control unit has: - incorrect or invalid software. or - incorrect or invalid spare part programming.

Variant 1

Applies to: DCS1 (DCS)

What does Scania DCS fault code 1048607 mean?

The DCS control unit has: - incorrect or invalid software. or - incorrect or invalid spare part programming.

What causes Scania DTC 1048607?

- The DCS control unit (E106) has incorrect software. - Spare part programming has not been completed correctly or performed at all.

How does the system react?

The control unit has reduced functionality.

How to fix Scania DCS fault code 1048607?

  1. Make sure that the DCS control unit has been updated with the latest software.
  2. Spare parts program the DCS control unit.
  3. Renew the control unit.

Variant 2: DCS control unit, incorrect spare part programming

Applies to: DCS1

Detection

The DCS control unit has a software error.

Possible cause

- The DCS control unit (E106) has incorrect software. - Spare part programming has not been completed correctly or performed at all.

System reaction

The control unit has reduced functionality.

How to fix

  1. Make sure that the DCS control unit has been updated with the latest software.
  2. Spare parts program the DCS control unit.
  3. Renew the control unit.

This information is for guidance only. Always follow the manufacturer workshop manual and safety procedures; if in doubt, contact an authorised workshop.

Code 1048607 in other Scania systems

Compare code 1048607 in every system →