Scania fault code 1028

EMS Engine Management System EGR valve with pneumatic control cylinder The temperature change in the intake manifold was higher than expected during a number of EGR activations. Read explanation → BMU Battery Management Unit Refrigerant compressor E140; rotational speed deviates The refrigerator compressor speed does not correspond to the requested speed. Read explanation → VDT Internal fault Invalid configuration. Read explanation → COO Coordinator Invalid intervention by differential brake steering An invalid intervention of differential brake steering has been detected and aborted. Read explanation → MBS #To be removed. BCI Wake up output open load - An open load on BCI wake up output has been detected. - ( but MBS cannot detect if BCI lost connection to GND) Read explanation → ALM Fault in the CAN communication with the chassis management system (CMS) A CAN message expected from the coordinator has failed to arrive. Read explanation → DAS Coordinator Signals from the coordinator interpreted as implausible. Read explanation → TCC TCC control unit, toilet cabin lighting, short circuit The control unit has detected that the circuit is short-circuited to earth or to the voltage supply. Read explanation → RTT Road Transport Informatics Cooling fan for motherboard The cooling fan for the motherboard does not start, which causes the RTI unit to switch off when the motherboard becomes overheated. Read explanation → SVIP Cooling fan for motherboard The cooling fan for the motherboard does not start, which causes the RTI unit to switch off when the motherboard becomes overheated. Read explanation →