Scania fault code 1810
Code 1810 is used by 3 different Scania systems. Choose the control unit shown in your diagnostic tool:
MBS
MBS expansion unit B, power supply pin group V1, current above limit value
MBS expansion unit B, current to the pin for power supply pin group V1 has exceeded the limit value of 20 A for more than 5 seconds.
Read explanation →
OCS
Relay for shut-off valves for vehicle gas on the high pressure side
High voltage in the circuit.
Read explanation →
ALLISON Allison automatic gearbox
Oil temperature sensor, voltage low
The control unit has detected that the sump oil temperature has been higher than a calibrated value for more than 2.5 seconds.
Read explanation →