Scania fault code 273

EBS Electronic Braking System Control unit Incorrect or unreliable data. Read explanation → EMS Engine Management System Charge air temperature The engine management system (EMS) has detected a deviation for the value from the exhaust manifold exhaust gas pressure sensor (T271) when comparing with the value from other pres… Read explanation → TMS Transmission Management System The clutch actuator is stuck The fault code is activated when there is a high torque in the rotary engine, but no change of position has been registered. Read explanation → EMD Temperature sensor in the intake manifold One or more faults in mass flow sensor T126. The mass flow sensor measures the temperature in the intake manifold. One or more faults in pressure and temperature sensor T202. The p… Read explanation → EME Combined sensor One or more faults in the combined sensor. One or more faults in the combined sensor. | One or more faults in the combined sensor. Read explanation → EMO Temperature sensor in the intake manifold One or more faults in mass flow sensor T126. The mass flow sensor measures the temperature in the intake manifold. One or more faults in pressure and temperature sensor T202. The p… Read explanation → VDT Solenoid valve Short circuit to battery for the solenoid valve coil. Read explanation → LAS Locking and Alarm System Alarm code, passenger door The fault affects engine performance. It is difficult to start the engine. Engine emissions are affected. Read explanation → WTA Overheat sensor Temperature at the overheat sensor rises too quickly. Read explanation → EACS CAN communication with rechargeable energy storage system (RES) CAN message from the RES control unit contains an unexpected value. Read explanation →