Applies to: EME1
What does Scania EME fault code 273 mean?
One or more faults in the combined sensor. One or more faults in the combined sensor. | One or more faults in the combined sensor.
What causes Scania DTC 273?
- Short circuit to battery. - Short circuit to ground. - Open circuit. - Short circuit to battery. - Short circuit to ground. - Open circuit. | - Short circuit to battery. - Short circuit to ground. - Open circuit.
How does the system react?
Engine power could be affected. Gas engines have torque limitation.
How to fix Scania EME fault code 273?
- Rectify any other fault codes for the combined sensor.
- Check the combined sensor, its harness-to-component connectors and cable harness.
- Check that the combined sensor is fitted correctly.
- Troubleshoot the combined sensor.
This information is for guidance only. Always follow the manufacturer workshop manual and safety procedures; if in doubt, contact an authorised workshop.
Code 273 in other Scania systems
- 273hex 0111 Control unit
- 273hex 000111 CAN communication with rechargeable energy storage system (RES)
- 273hex 0111 Temperature sensor in the intake manifold
- 273hex 0111 Temperature sensor in the intake manifold
- 273hex 0111 Charge air temperature
- 273hex 0111 Alarm code, passenger door
- 273hex 0111 The clutch actuator is stuck
- 273hex 0111 Solenoid valve
- 273hex 0111 Overheat sensor