Scania fault code 276
Code 276 is used by 8 different Scania systems. Choose the control unit shown in your diagnostic tool:
EMS Engine Management System
Sensor for intake air pressure and temperature T4000
The value from temperature sensors T126/T202 in the intake pipe has not changed over an implausibly long period of time.
Read explanation →
TMS Transmission Management System
Clutch actuator, shorted in electric motor
The electric motor phases have shorted or have an open circuit.
Read explanation →
EMD
Temperature sensor in the intake manifold
The value from temperature sensor T126 in the intake manifold has not changed for an implausibly long period of time. The value from temperature sensor T202 in the intake manifold…
Read explanation →
EME
Combined sensor
The value of the temperature signal from the combined sensor has not changed over an implausibly long period of time. The value of the temperature signal from the combined sensor h…
Read explanation →
EMO
Temperature sensor in the intake manifold
The value from temperature sensor T126 in the intake manifold has not changed for an implausibly long period of time. The value from temperature sensor T202 in the intake manifold…
Read explanation →
VDT
Solenoid valve
The solenoid valve core is live even though it is off.
Read explanation →
LAS Locking and Alarm System
Alarm code, luggage compartment door
The fault affects engine performance. It is difficult to start the engine. Engine emissions are affected.
Read explanation →
EACS
Oil level monitor
Open circuit in the oil level monitor.
Read explanation →