Scania fault code 525
Code 525 is used by 6 different Scania systems. Choose the control unit shown in your diagnostic tool:
CUV Visibility system
Windscreen wiper, intermittent wiping
The signal from the intermittent wiper control has been short circuited to ground for more than two seconds.
Read explanation →
BCI
Short circuit, C628-17
Short circuit to ground or overload.
Read explanation →
CMS
CAN communication on the control unit sub data bus 2
Short circuit in the control unit sub data bus 2.
Read explanation →
ACS Articulation Control System
Angle sensor
Short circuit to ground in the angle sensor circuit.
Read explanation →
DCU
Door control unit, incorrect location in bus
The door control unit location according to its programming does not match the location read from the CAN network.
Read explanation →
ACSX
Left-hand pressure sensor
Short circuit to ground in the pressure sensor circuit.
Read explanation →