Scania fault code 537
Code 537 is used by 9 different Scania systems. Choose the control unit shown in your diagnostic tool:
EMS Engine Management System
Engine speed
The engine speed has been above the permitted level.
Read explanation →
EMD
Engine speed
The engine speed has been above the permitted level.
Read explanation →
EME
Engine speed
The engine speed has been above the permitted level.
Read explanation →
EMO
Engine speed
The engine speed has been above the permitted level.
Read explanation →
VDT
Output signal
Short circuit to battery on output for control unit E754.
Read explanation →
COO Coordinator
Ambient temperature sensor, driver's side
The supply voltage is below the threshold value.
Read explanation →
CUV Visibility system
Direction indicator rear right
Current consumption on the control unit output has exceeded 5.3 A for one second.
Read explanation →
BCI
Fuel level sensor, extra fuel tank
The fuel level sensor voltage value from the extra fuel tank is too high.
Read explanation →
ALM
Micro switch lower storage compartment driver's side (truck)/micro switch A7 (bus), short circuit
The micro switch is short-circuited to earth.
Read explanation →