Scania fault code 549

EMS Engine Management System Post injection ontime too long, cylinder 5. The error is detected when the post injection ontime, for either post1 or post2, has been consequtively too long for a period of time. Read explanation → VDT Output signal Invalid configuration. Read explanation → COO Coordinator Manual activation of retarder The voltage in the circuit for the retarder lever or for the auxiliary brake lever has been above the permitted level. Read explanation → ELC Electronically controlled air suspension Voltage supply for solenoid valve. Open circuit or too low current consumption in circuit. Read explanation → CUV Visibility system Trailer brake lights Current consumption on the control unit output has exceeded 8 A for one second. Read explanation → BCI Configuration fault, Expansion unit H The expansion unit is responding, but does not exist according to the vehicle configuration. Read explanation → LAS Locking and Alarm System Motion sensor in the cab No communication with MMS when vehicle is alarmed. Read explanation → CMS Communication error, DDU or ICL CAN communication with the instrument cluster or DDU control unit is broken. Read explanation → ALM Micro switch lower storage compartment passenger side (truck)/micro switch A9 (bus), short circuit The micro switch is short-circuited to earth. Read explanation → EST Motor pump unit Implausible value. Read explanation → ESTA Motor pump unit Implausible value. Read explanation →