Scania fault code 567

EBS Electronic Braking System Brake performance The reduction in speed of the vehicle does not correspond to the reduction in speed requested when braking. Read explanation → VDT CAN bus Invalid configuration of permitted PWM range. Read explanation → COO Coordinator Communication with the retarder Communication between coordinator and retarder, which is controlled by the GMS control unit, has been interrupted. Read explanation → MBS #Not implemented. Short circuit on rear view mirror heating output, left side Short to supply evaluated cyclically when output is inactive. Short to ground evaluated cyclically when output is active. Voltage at pin out of valid range. Read explanation → CUV Visibility system Bumper-mounted spotlight Current consumption on the control unit output has exceeded 8.6 A for one second. Read explanation → BCI Excess current, ExpI-B16 Excess current or short circuit to supply voltage. Read explanation → ACS Articulation Control System GMS control unit, signal fault The engine speed signal is displaying an implausible value, or does not exist. Read explanation → EST Caster-steered fault mode The axle steering does not adopted the expected position, or fixed centred position has been lost. Read explanation → ESTA Caster-steered fault mode The axle steering does not adopted the expected position, or fixed centred position has been lost. Read explanation →