Scania fault code 585
Code 585 is used by 8 different Scania systems. Choose the control unit shown in your diagnostic tool:
EMS Engine Management System
Wastegate valve
The wastegate actuator pressure indicates deviations from normal operating level.
Read explanation →
EMD
Wastegate valve
Short circuit to battery or ground or open circuit.
Read explanation →
EME
Wastegate valve V109
Short circuit to battery or ground or open circuit.
Read explanation →
EMO
Wastegate valve V109
Short circuit to battery or ground or open circuit.
Read explanation →
VDT
Internal fault
Invalid configuration.
Read explanation →
COO Coordinator
AWD control unit, anomalous configuration
The coordinator has identified divergent information from the AWD control unit.
Read explanation →
CUV Visibility system
Relay 19, current consuming equipment
Current consumption on the control unit output has exceeded 1 A for one second.
Read explanation →
ALM
Micro switch extra sensor 1 (truck)/micro switch E1 (bus), open circuit or short circuit
The micro switch has an open circuit or is short-circuited to the voltage supply.
Read explanation →