Scania fault code 593

EMS Engine Management System Fuel inlet metering valve, open circuit The engine control unit has detected an abnormal voltage, indicating a break in the circuit. Read explanation → VDT Internal fault Invalid configuration. Read explanation → COO Coordinator Communication with the BMS control unit The communication between the coordinator and the BMS control unit has been interrupted. Read explanation → CUV Visibility system Rear foglight switch The rear foglight switch has been sending an error message to the control unit for more than one second. Read explanation → BCI Short circuit, C259-15 Short circuit to ground or overload. Read explanation → LAS Locking and Alarm System Siren The fault affects engine performance. It is difficult to start the engine. Engine emissions are affected. Read explanation → ALM Micro switch extra sensor 2 (truck)/micro switch E2 (bus), short circuit The micro switch is short-circuited to earth. Read explanation → DAS Communication with the EBS control unit Communication with the EBS control unit has been interrupted. Read explanation → ACS Articulation Control System ACSX node, incompatible software version. Read explanation → EST Steering angle sensor The steering angle sensor is not calibrated. Read explanation → ESTA Steering angle sensor The steering angle sensor is not calibrated. Read explanation → ACSX Oil leakage from right damper Read explanation →