Scania fault code 598

EMS Engine Management System Fuel inlet metering valve, open circuit The engine control unit has detected an abnormal voltage, indicating a break in the circuit. Read explanation → VDT Invalid CAN message Faulty or missing CAN message. Read explanation → COO Coordinator Yellow CAN bus All communication on the yellow CAN bus is interrupted. Read explanation → CUV Visibility system Cornering lamp, left Current consumption on the control unit output for the cornering lamp control signal has exceeded 5 A for one second. Read explanation → BCI Short circuit, C259-15 Short circuit to supply voltage (+24 V) or reference voltage (+5 V). Read explanation → DAS CAN bus for forward looking camera All communication on the CAN bus for the forward looking camera is interrupted. Read explanation → EST Degradation valve position The signal from the valve position sensor about the position of the degradation valve differs from the requested position from the control unit. Read explanation → ESTA Degradation valve position The signal from the valve position sensor about the position of the degradation valve differs from the requested position from the control unit. Read explanation →