Scania fault code 65

EMS Engine Management System Silencer intake, temperature too high The engine control unit has detected that the temperature in the exhaust gas aftertreatment management system is too high. Read explanation → VDT Temperature and oil level sensor Short circuit to ground. Read explanation → COO Coordinator Communication with the body builder control unit Communication between the coordinator and the bodywork control unit has been interrupted. Read explanation → ABS Anti-lock Braking System Wheel speed Low signal strength from the wheel on the right-hand side of the driving rear axle. Read explanation → CUV Visibility system Direction indicators on trailer, left. Open circuit or too low current consumption in circuit. Read explanation → LAS Locking and Alarm System CAN bus CAN messages from the alarm control unit are not confirmed by any other unit on the bus. Read explanation → AUS Audio System Overheated circuit board The temperature sensor of the circuit board has registered an excessive temperature. Read explanation → AMP External amplifier, overheated circuit board The external amplifier reports increased circuit board temperature. Read explanation →