Scania fault code 768

EMS Engine Management System Misfiring in one or more cylinders One or more cylinders are not delivering any torque. Read explanation → TMS Transmission Management System Timeout when validating immobiliser - The validation between the coordinator and the TMS control unit took too long. - Timeout in the immobiliser timer. Read explanation → COO Coordinator Air suspension remote control 2 A button for vehicle level adjustment has been active for an implausible amount of time. Read explanation → MBS Sensor for rear left-hand hatch, short circuit Short circuit to earth has been detected on the connection to the electric power supply for the rear left-hand hatch sensor. The voltage is outside the limit value. Read explanation → DDU Yellow CAN bus, no CAN communication The DDU control unit has not received any CAN messages from the yellow CAN bus. Read explanation → MGU Invalid configuration The MGU control unit does not have a valid configuration. Read explanation → PCS CAN message missing The number of received messages does not match the control number. Read explanation → LAS Locking and Alarm System CAN communication CAN messages from the alarm control unit are not confirmed by any other unit on the CAN bus. Read explanation → ICL Instrument Cluster CAN communication, yellow CAN bus No CAN communication for yellow CAN bus. Read explanation → TCC TCC control unit, internal fault The TCC control unit has detected an internal fault in the voltage regulators or communication buses. Read explanation → SC Digital tachograph card The tachograph does not approve the second driver's digital tachograph card in slot 2. Read explanation → AMP DDU control unit, communication error The external amplifier is not receiving CAN messages from the DDU control unit. Read explanation →