Scania fault code 792

COO Coordinator Switch, kneeling The coordinator has interpreted the signal from the switch as prohibited. Read explanation → MBS BCI control unit, before disconnection of the battery, signal fault The CAN signal from the BCI control unit before disconnection of the battery results in an error message. Read explanation → DDU APS control unit, no CAN communication The DDU control unit is not receiving CAN messages from the APS control unit. Read explanation → ICL Instrument Cluster Communication with the lane departure warning (LDW) system No CAN message from the air processing system. Read explanation → CMS Emergency stop control, short circuit to ground The signal from the emergency stop control is too low. Read explanation → DCU Emergency opening system reset valve B, output, short circuit - Maximum current level has been detected on the 24 V output of the reset valve (CN6-8). - The current to the reset valve has exceeded 2 A. Read explanation →