Scania fault code 793

BMU Battery Management Unit Battery pack interlook loop fault Read explanation → COO Coordinator Switch, kneeling The coordinator has interpreted the signal from the switch as prohibited. Read explanation → MBS Sensor for battery charging cover, open circuit Open circuit for the voltage supply of the battery charging cover sensor detected. Read explanation → DDU EPB control unit, no CAN communication The DDU control unit is not receiving CAN messages from the EPB control unit. Read explanation → ICL Instrument Cluster Communication with the electropneumatic parking brake system (EPB) No CAN message from the electropneumatic parking brake system. Read explanation → CMS Emergency stop control, signal fault There is a short circuit to battery or an open circuit on the PWM signal for the emergency stop control. Read explanation → DCU Output, sensor power supply, voltage too low The voltage on the supply pin for the sensor electric power supply output is 1 V under the selected voltage. The default selected voltage is set to 12 V. Read explanation →