Scania fault code 800

BMU Battery Management Unit Discharging fault on the voltage class B circuit Discharging fault on the voltage class B circuit when shutting down the hybrid system. After shutting down the hybrid system there is still voltage in the voltage class B circuit. Read explanation → COO Coordinator Comfort Shift The control unit has detected a fault in the circuit for the Comfort Shift interlock valve. Control unit pin A30 receives information on the signals to the interlock valve and inte… Read explanation → MBS Climate control panel, rotary control out of order The rotary control on the climate control panel is out of order. Read explanation → PCS CAN message missing The number of received messages does not match the control number. Read explanation → ICL Instrument Cluster CAN communication with DAS The expected CAN message from the DAS control unit is missing. Read explanation → CMS Emergency stop control, signal fault There is an overload or short circuit to ground on the PWM signal for the emergency stop control. Read explanation → DCU Door control unit, output for voltage supply to connected components, short circuit - Maximum current level has been detected on the 24 V output of the reset valve (CN3-2). - The current from the 24 V output has exceeded 2 A. Read explanation →